Jason Emer, MD, FAAD, FACS

Rounder Glutes Without Surgery Alloclae Plus Sculptra For Men Who Train

Rounder Glutes Without Surgery: Alloclae Plus Sculptra For Men Who Train

How Dr. Jason Emer builds and lifts the male glute using Alloclae blended with proprietary peptides and PLA, with minimal downtime and results that improve as you train.

Schedule Consultation Watch Dr. Emer explain

Still from the filmed session. Individual results vary.

THE DETAIL IS THE DIFFERENCE.See the results ↓

Dr. Jason Emer MD · FAAD · FACS

MD, FAAD, FACS: board-certified dermatologist and cosmetic surgeon
Former Chief Resident in dermatology, Mount Sinai, New York
More than 10,000 patient encounters
Male facial sculpting longer than anyone in the United States
The highest filler volume on the West Coast
West Hollywood and New York

The practice's own photographs

Before. After.

Patients of the practice, from Dr. Emer's published before and after gallery. Each case is one patient. Individual results vary.

Before and after, Torso Chest, patient 252971 — Torso ChestPatient 252971

Before and after, Torso Chest, patient 253172 — Torso ChestPatient 253172

Before and after, Torso Chest, patient 255769 — Torso ChestPatient 255769

Before and after, Torso Chest, patient 255792 — Torso ChestPatient 255792

Before and after, Torso Chest, patient 255795 — Torso ChestPatient 255795

Before and after, Torso Chest, patient 253014 — Torso ChestPatient 253014

See the full before and after gallery

Alloclae blended with proprietary peptides and PLA, molded by hand into trained muscle, adds roundness and lift with days of downtime, not weeks.

Your plan starts with Dr. Emer.

Schedule Consultation

Reserve online. West Hollywood and New York.

From the filmed session

Inside the treatment. With Dr. Emer.

| Dr. Jason Emer

Open on YouTube

What Dr. Emer did · MAXORIS

Every procedure. In order.

01

Nerve block and anesthesia

Nerve block administered to make the session tolerable, followed by local lidocaine infiltration at injection sites.

“we have really good nerve blocks that make it much more tolerable”
Dr. Emer, in the film
02

Alloclae volumization with peptide and PLA blend MAXORIS^™

Alloclae (cadaver ECM basement membrane) mixed with proprietary peptide combinations and PLA, injected deep into glute tissue in multiple passes, top to middle to bottom, creating immediate volume and tissue stimulation.

“we have our large volume volumizer alo clay that we mix with proprietary combinations of peptides and PLA to get a amazing result for our patients who don't want to do a surgery”
Dr. Emer, in the film
03

Manual molding and contouring

Material hand-molded into position immediately after placement to create roundness at the top, peak at the middle, and softness at the bottom, with blending massage to ensure even distribution.
04

Closure with dissolvable suture

Single dissolvable stitch at each entry point, self-absorbing within days.

“now all we do is we put in a dissolvable stitch and in a couple days those will fall out”
Dr. Emer, in the film

Why patients fly in

What Dr. Emer does differently.

Regenerative volumizer, not just filler

Alloclae is cadaver ECM (the basement membrane that holds fat cells in tissue) blended with peptides and PLA to stimulate the patient's own tissue, not simply add volume. The initial result builds over months as the patient trains.

Hand-molded placement during the session

Dr. Emer molds the material by hand immediately after injection, shaping roundness at the top, a peak at the middle, and softness at the bottom, adjusting in real time as he assesses symmetry.

Minimal downtime for athletes and men who train

Patients return to the gym within a couple of days, and continued training helps the result build. No surgical recovery, no weeks off training.

“in a couple days, he can go back to the gym”

Layered approach without waiting periods

Additional sessions can be performed immediately if more volume is desired. No mandatory waiting period between treatments because the material integrates as the patient's own tissue.

THE THINKING BEHIND THE TREATMENT

The story.
The decisions.
The details.

Follow Dr. Emer’s approach through the stages described in this case.

Back to the video ↗

01Before
The starting point
Consistent training built muscle, but the glutes stayed flat and the laxity from weight loss needed density.
He arrived having lost a bunch of weight and built good muscle, but the glutes had that laxity that comes with weight loss and needed density, not just shape. Dr. Emer placed Alloclae blended with proprietary peptides and PLA to add roundness and lift, molding the material into place by hand.
02The plan
What Dr. Emer decided to do
Planned around a training schedule: minutes per side, and back under the bar within days.
03The session
In the room, in order
The lift was visible side by side during the session: one side treated while the other waited, then both blended and symmetric. Each entry point closed with a single dissolvable stitch that falls out on its own, and he was cleared to train again within a couple of days.
- Nerve block and prep
- Place and mold
- Close with a dissolvable stitch
- Back to training in days
04What comes next
Recovery and what to expect
This patient can be back in the gym within a couple of days. That matters, because the result is designed to work with training: as he loads the glute, the material molds and the muscle underneath is stimulated. Dr. Emer recommends adding True Sculpt Flex or EMSculpt to further activate the area, or simply continuing to train.
The initial result is not the final result. It improves over the following months as the tissue integrates and the patient works out.
“And in a couple days, he can go back to the gym.”DR. JASON EMER · FROM THE VIDEO

Read the complete story +

The patient story

Volume that builds as you lift

The patient in this video lost weight and built muscle, but the glutes stayed flat. He had the laxity that comes with weight loss and needed density, not just shape. That is the case Dr. Emer built this treatment for: Alloclae blended with proprietary peptides and PLA placed to add roundness and lift, then stimulated further by the patient's own training.

This is not a replacement for surgery when surgery is the right tool. It is an office procedure for men who want a rounder glute without the downtime of fat grafting or a full BBL, and who are willing to build the result over time with their workouts.

What the treatment actually does

Alloclae is a regenerative volumizer made from cadaver ECM, the basement membrane that holds fat cells in tissue. Dr. Emer blends it with proprietary peptides and PLA to help the material integrate and stimulate the surrounding tissue. Placed into the glute, it adds immediate volume and then continues building as the patient trains.

In the video the change is visible side to side during the session: one side treated and lifted while the other waits, then both sides blended and symmetric. The little bumps visible immediately after are lidocaine and smooth out within hours. Each entry point closes with a dissolvable stitch that falls out on its own.

Downtime measured in days, not weeks

This patient can be back in the gym within a couple of days. That matters, because the result is designed to work with training: as he loads the glute, the material molds and the muscle underneath is stimulated. Dr. Emer recommends adding True Sculpt Flex or EMSculpt to further activate the area, or simply continuing to train.

The initial result is not the final result. It improves over the following months as the tissue integrates and the patient works out.

Who this fits

Candidacy depends on how much fat you have on the glute, what outcome you expect, and whether your goals are realistic for an injectable approach. If you have very minimal fat and expect a huge outcome, you will need a lot of product or a different plan entirely.

This is a tool for men who want roundness and lift without surgical recovery, and who are willing to build the result over time. If you want maximum volume in one session, fat grafting or a BBL may be the better fit. A consultation covers which approach makes sense for your build and timeline.

The treatment, explained

What is non-surgical glute enhancement?

Also called Alloclae glute augmentation, regenerative glute volumization, PLA glute lift, non-surgical BBL alternative, injectable glute sculpting for men, cadaver ECM glute enhancement.

What it is: Non-surgical glute enhancement using Alloclae, a cadaver-derived extracellular matrix (ECM) volumizer, blended with proprietary peptides and poly-L-lactic acid (PLA). Alloclae is the basement membrane that holds fat cells in tissue, injected deep into the glute to add immediate volume and stimulate the patient's own tissue over time. This is an office procedure, not a Brazilian butt lift (BBL) or fat grafting surgery.
How it works: A nerve block and local anesthesia are administered first. Alloclae mixed with peptides and PLA is injected into the glute in multiple passes, targeting the upper, middle, and lower zones. Dr. Emer hand-molds the material into position during the session to create roundness, lift, and symmetry. Each entry point is closed with a single dissolvable stitch. The material integrates over the following months as the patient trains, and the result continues to build.
Who it is for: Men who train consistently and want more roundness and lift in the glutes without surgical downtime. Ideal candidates have some existing muscle and fat but lack the shape or density they want, often after weight loss. Patients with very minimal fat who expect a dramatic outcome may need multiple sessions or a different approach. Realistic expectations and a commitment to continued training are important.
Recovery: Most patients return to the gym within a couple of days. The dissolvable stitches fall out on their own. Mild soreness and temporary bumps from lidocaine resolve quickly. Dr. Emer recommends adding TruSculpt Flex or EMSculpt to further activate the area, or simply continuing regular glute training. The specific recovery plan is set at consultation based on the individual case.
When results show: A visible lift appears during the session, with one side treated first so the difference is clear. The initial result is not the final result. The outcome continues to build over the following months as the patient trains and the material stimulates surrounding tissue. Additional sessions can be layered without waiting if more volume is desired. Long-term results depend on training and tissue response.

Signature procedures

Only at Emer.

Body / AETHRAFORM top tier

MAXORIS^™ APEX

The top tier of MAXORIS^™ body sculpting: high-definition liposculpture, fat grafting and internal tightening, planned as one masculine geometry rather than separate areas.

Book MAXORIS^™ APEX Explore

Peptides / biologic optimization

RECODEX^™

Peptide and biologic protocols for recovery, body composition and longevity, with epigenetic testing. RECODEX^™ peptides are available to purchase through the practice after consultation.

Book RECODEX^™Explore

Face / jaw

MAX-JZ

Dr. Emer's male jaw and face sculpting: a sharp mandibular line and defined angles, built with structural filler, debulking liposuction with internal heating, and hidden-scar neck lifting when the anatomy calls for it.

Book MAX-JZ Explore

From Dr. Emer's Instagram

The work, as he shows it.

@jasonemermd @recodexsystem

View this post on Instagram

Why Dr. Emer

Sculpting is a craft. He set the standard.

Two decades of results, a global patient base, and techniques other surgeons travel to learn.

Dr. Emer built his reputation on outcomes that read as natural at rest and unmistakable in motion. He pioneered high-definition body sculpting approaches that are now taught internationally, and he personally performs every procedure in his practice.

Patients come to him when the result has to be precise: athletes protecting a physique they earned, men who want structure without surgery, and people who have been elsewhere and want it done right.

MD, FAAD, FACS: board-certified dermatologist and cosmetic surgeon
Former Chief Resident in dermatology, Mount Sinai, New York
More than 10,000 patient encounters
Male facial sculpting longer than anyone in the United States
The highest filler volume on the West Coast
West Hollywood and New York

About Dr. Emer Schedule Consultation

EMER METHOD^™×RECODEX^™

Immediate volume

The material adds roundness and lift during the session, visible side to side as each side is treated.

Continued building

The initial result is not the final result. It improves over the following months as the patient trains and the material integrates.

Works with training

Dr. Emer recommends adding True Sculpt Flex or EMSculpt to further activate the area, or simply continuing to train.

Layered approach

If more volume is needed, additional sessions can be done without waiting. Most patients build the result over time.

Asked plainly, answered plainly

What men ask before they book.

Is this the same as a BBL?+

No. A Brazilian butt lift (BBL) is fat grafting with liposuction and surgical recovery, often weeks off training. This is an office procedure using a regenerative volumizer (Alloclae blended with peptides and PLA), with minimal downtime and return to the gym within days.

How fast do I see the result?+

A visible lift appears during the session. Dr. Emer treats one side first so you can see the difference immediately. The outcome continues to build over the following months as you train and the material integrates with your tissue.

What is the downtime?+

Most patients return to the gym within a couple of days. The dissolvable stitches fall out on their own. Mild soreness and temporary bumps from lidocaine resolve quickly. The specific timeline is set at consultation based on how your session goes.

Who is not a candidate?+

If you have very minimal fat on the glute and expect a huge outcome, you will need a lot of product or multiple sessions. Candidacy depends on realistic expectations for what an injectable approach can do. Dr. Emer assesses your build and goals at consultation.

Can I do more than one session?+

Yes. If you want more volume, additional sessions can be done immediately, even the next day. There is no mandatory waiting period because the material integrates as your own tissue. Most patients build the result over time.

Does it hurt?+

There are a few pinches at the start, but the nerve block and local anesthesia make the session much more tolerable. Most patients describe mild discomfort during injection, then numbness as the anesthetic takes effect.

What is Alloclae?+

Alloclae is a cadaver-derived extracellular matrix (ECM), specifically the basement membrane that holds fat cells in tissue. Dr. Emer blends it with proprietary peptides and PLA to create a regenerative volumizer that adds immediate volume and stimulates your own tissue over time.

Will training help the result?+

Yes. Continued glute training helps the result build as the material integrates. Dr. Emer recommends adding TruSculpt Flex or EMSculpt to further activate the area, or simply continuing your regular workouts. The more you stimulate the glute, the better the long-term outcome.

Discuss your plan

A consultation reviews your anatomy, goals and history, and maps which options apply to you.

Schedule Consultation

West Hollywood and New York City

Rounder Glutes Without Surgery Alloclae Plus Sculptra For Men Who Train

Before. After.

Inside the treatment. With Dr. Emer.

| Dr. Jason Emer

Every procedure. In order.

Nerve block and anesthesia

Alloclae volumization with peptide and PLA blend MAXORIS™

Manual molding and contouring

Closure with dissolvable suture