Jason Emer, MD, FAAD, FACS
Upper Chest Enhancement With Alloclae: Why Men Who Already Train Are Flying In For This
Dr. Jason Emer uses Alloclae to lift and build the upper chest on men who already train, molding regenerative tissue directly into muscle for a shield-like contour with minimal downtime.
Dr. Jason Emer MD · FAAD · FACS
The practice's own photographs
Patients of the practice, from Dr. Emer's published before and after gallery. Each case is one patient. Individual results vary.
See the full before and after gallery
Every case above is a patient of the practice. Your consultation with Dr. Emer starts with your photographs and your goals.
Dr. Emer places Alloclae directly into the upper chest muscle to build the shelf and cleavage that training alone cannot create, molding regenerative tissue by hand so it sets exactly where the patient wants volume.
Your plan starts with Dr. Emer.
Book online and reserve your time with a card, or call the office. West Hollywood and New York.
From the filmed session
What Dr. Emer did · MAXORIS
Adipose-derived regenerative matrix placed into the muscle fibers of the upper chest and pectoralis with a blunt cannula, molded by hand into a shield-like contour to lift the upper chest and deepen cleavage, then massaged into position so the matrix fibers bind to surrounding fat cells and muscle.
Manual molding of the Alloclae matrix into the exact shape planned, pressing the fibrous matrix into the muscle and fat so it grabs onto the cells and holds position without shifting or lumping.
Single dissolvable stitch at each cannula entry point, no removal required.
“What we do make it easy so that he can literally go back work out. We're going to do a little stitch that's dissolvable.”
Dr. Emer, in the film
Why patients fly in
While adipose-derived products are typically placed in fat, Dr. Emer injects Alloclae into the muscle fibers of the pectoralis to build the upper chest shelf and cleavage that training alone cannot create, with no risk of embolism in this area.
The Alloclae matrix is fibrous, not liquid like fat cells, so Dr. Emer manually molds it into position and massages it so the fibers grab onto the surrounding cells and hold the shape without shifting or lumping.
Dr. Emer creates the same squared, lifted upper chest contour he uses in fat grafting and chest implant cases, with visible separation between the deltoid, bicep and pec and a defined cleavage line.
“We're injecting those areas right now in what I call like the shieldlike look. And again, when I do my fat grafting and we do chest implants, we're doing in that technique where we create that shield for men. And it makes the cleavage more and it makes the chest a little bit more squared.”
Because Alloclae contains stem cells and growth factors, Dr. Emer's patients use it not only for aesthetic enhancement but also to help the muscle grow and repair after injuries like a torn pec or bicep, an advantage for athletes and bodybuilders.
“A lot of athletes out there are getting these things done, too. Had a bunch of bodybuilders and professional athletes doing this, not just for the size, but for the regenerative capacity because they hurt a pec or let's say they ripped their bicep. You do this, it repairs it.”
THE THINKING BEHIND THE TREATMENT
Follow Dr. Emer’s approach through the stages described in this case.
Back to the video ↗Lean, muscular, and consistent in the gym. The upper chest was where training alone stalled.
He arrived already built, months into his second session with Dr. Emer. The first treatment set the base, and this visit was about building more upper chest volume and cleavage definition. Dr. Emer placed Alloclae along the upper chest and molded it directly into the muscle, creating what he calls a shield-like look: squared, lifted, and blended into the existing contour.
Planned around a training schedule: minutes per side, and back under the bar within days.
The result was visible immediately, side by side, one side treated while the other waited. Each entry point closed with a single dissolvable stitch, and he was back in the gym three days later.
“So see you guys can see now upper chest built out, cleavage built out and more of that angle that he was looking for.”DR. JASON EMER · FROM THE VIDEO
This patient worked out three days after his first session and reported no pain, no weird sensations, and no disruption to his routine. Dr. Emer closes each entry point with a single dissolvable stitch, so there is nothing to remove later.
The regenerative capacity of the material means continued training actually helps the result. As the patient lifts, the tissue firms into the contour and the muscle continues to build around it. That is the unfair advantage Dr. Emer mentions: protein, hormonal optimization, peptides, and now regenerative tissue working together.
Upper chest and cleavage, molded into muscle / Patient story
Lean, muscular, and consistent in the gym. The upper chest was where training alone stalled.
He arrived already built, months into his second session with Dr. Emer. The first treatment set the base, and this visit was about building more upper chest volume and cleavage definition. Dr. Emer placed Alloclae along the upper chest and molded it directly into the muscle, creating what he calls a shield-like look: squared, lifted, and blended into the existing contour.
The result was visible immediately, side by side, one side treated while the other waited. Each entry point closed with a single dissolvable stitch, and he was back in the gym three days later.
The patient in this video is lean, muscular, and consistent in the gym. He had already completed one session months earlier, and this visit was about building more upper chest volume and cleavage definition. This is not a treatment for someone starting from zero. It is a finishing tool for men who train hard and want the upper chest to match the work they are putting in.
Dr. Emer placed Alloclae along the upper chest and molded it directly into the muscle, creating what he calls a shield-like look: squared, lifted, and blended into the existing contour. The result was visible immediately, side by side, one side treated while the other waited.
Alloclae is a regenerative, adipose-derived product that integrates with surrounding tissue. It is not fat, and it is not an implant. Dr. Emer describes it as clay: a matrix of cells that molds into position and then binds to the muscle and fat around it.
Because the tissue is regenerative, it contains stem cells and growth factors. That means it does more than add volume. It helps the muscle grow and repair, which is why athletes and bodybuilders are using it not only for size but for recovery after injuries like a torn pec or bicep.
How a session is built
Planned around a training schedule: minutes per side, and back under the bar within days.
The chest is assessed and marked so both sides finish symmetric and blended, with the upper chest lifted and the cleavage deepened.
Alloclae is placed along the upper chest and into the muscle, then molded by hand into the exact shape planned. The molding step is what keeps the result smooth and prevents shifting.
Each entry point closes with a single dissolvable stitch, nothing to remove later.
Most patients are cleared within days, and continued training helps the result firm into the contour as the muscle builds around it.
The treatment, explained
Also called regenerative chest enhancement for men, upper chest sculpting, pectoral enhancement, chest cleavage enhancement, non-surgical chest augmentation, adipose-derived chest enhancement, stem cell chest enhancement.
Ready when you are.
Pick your consultation, reserve it online with a card, and Dr. Emer's team confirms the time. Or call the office.
Signature procedures
Body / AETHRAFORM top tier
The top tier of MAXORIS™ body sculpting: high-definition liposculpture, fat grafting and internal tightening, planned as one masculine geometry rather than separate areas.
Peptides / biologic optimization
Peptide and biologic protocols for recovery, body composition and longevity, with epigenetic testing. RECODEX™ peptides are available to purchase through the practice after consultation.
Face / jaw
Dr. Emer's male jaw and face sculpting: a sharp mandibular line and defined angles, built with structural filler, debulking liposuction with internal heating, and hidden-scar neck lifting when the anatomy calls for it.
Why Dr. Emer
Two decades of results, a global patient base, and techniques other surgeons travel to learn.
Dr. Emer built his reputation on outcomes that read as natural at rest and unmistakable in motion. He pioneered high-definition body sculpting approaches that are now taught internationally, and he personally performs every procedure in his practice.
Patients come to him when the result has to be precise: athletes protecting a physique they earned, men who want structure without an implant, and people who have been elsewhere and want it done right.
Alloclae is a matrix of cells that molds into position and then binds to the surrounding tissue. That is why the molding step matters: the matrix fibers grab onto the fat cells and hold them in place.
The material is regenerative, which means it does more than add volume. It helps the muscle grow and repair, which is why athletes and bodybuilders are using it for recovery after injuries like a torn pec or bicep.
As the patient lifts, the tissue firms into the contour and the muscle continues to build around it. That is the unfair advantage: protein, hormonal optimization, peptides, and now regenerative tissue working together.
Asked plainly, answered plainly
No. Alloclae is an adipose-derived regenerative matrix placed into and over the muscle with a blunt cannula, molded by hand into the exact shape planned. It is not an implant, and there is no surgical recovery.
A visible lift appears during the session, side by side, as one side is treated while the other waits. The outcome continues building as the tissue integrates with muscle and fat, and the muscle grows around it with continued training.
Most patients return to the gym within days. The patient in this case worked out three days after his first session and reported no pain, no unusual sensations and no disruption to his routine. Bruising is minimal, and swelling resolves quickly.
Many patients build in stages, layering treatments over months of training. The patient in this case is on his second session. Some men build in one visit, others in stages. The plan is decided in consultation based on your build, goals and training schedule.
Yes. Because Alloclae contains stem cells and growth factors, it helps the muscle grow and repair. Dr. Emer's patients include professional athletes and bodybuilders using the treatment for recovery after injuries like a torn pec or bicep, alongside the aesthetic benefit.
While adipose-derived products are typically placed in fat, Dr. Emer injects Alloclae into the muscle fibers of the upper chest to build the shelf and cleavage that training alone cannot create. There is no risk of embolism in this area, and the regenerative tissue helps the muscle grow.
The Alloclae matrix is fibrous, not liquid like fat cells. Dr. Emer molds it by hand into the exact shape planned and massages it so the fibers grab onto the surrounding cells and hold position. Without molding, the material can shift or look lumpy.
Dr. Emer creates a squared, lifted upper chest contour with visible separation between the deltoid, bicep and pec and a defined cleavage line. It is the same shape he uses in fat grafting and chest implant cases, and it makes the chest look more masculine and built.
Ask Dr. Emer in person.
Every question above is answered properly in a consultation. Book online, or call the office.
A consultation with Dr. Emer covers your build, your goals, and whether Alloclae upper chest enhancement fits your plan.
West Hollywood and New York City