Jason Emer, MD, FAAD, FACS
A Lifted, Muscular Butt Without Implants: Alloclae Plus Sculptra For Men Who Already Train
How Dr. Jason Emer lifts and builds the male buttock using Alloclae blended with Sculptra, layered on top of real gym work rather than replacing it.
Dr. Jason Emer MD · FAAD · FACS
The practice's own photographs
Patients of the practice, from Dr. Emer's published before and after gallery. Each case is one patient. Individual results vary.
See the full before and after gallery
Every case above is a patient of the practice. Your consultation with Dr. Emer starts with your photographs and your goals.
Regenerative filler molded directly into trained glute muscle, building the upper shelf and lift in one session with days of downtime, not weeks.
Your plan starts with Dr. Emer.
Book online and reserve your time with a card, or call the office. West Hollywood and New York.
From the filmed session
What Dr. Emer did · MAXORIS
Alloclae (acellular dermal matrix with fat cell components and ECM) blended with Sculptra placed in multiple vectors along the buttock and upper shelf, molded by hand into the muscle and subcutaneous layer to lift the lower buttock and build the upper shelf. Each entry point closed with a single dissolvable stitch.
Why patients fly in
Dr. Emer places the regenerative blend and then physically molds it into the muscle and tissue by hand during the session, building structure that firms with continued training.
“And so we're using it in this way that we're going to basically mold it into his tissue.”
This patient has had treatments before. Each session builds on the last, layered on months of training, so the result integrates with real muscle.
“We've done treatments before so you guys see me working and building but I'm using this to lift the bottom of his buttock and give him more of an upper shelf.”
The blend combines acellular dermal matrix (fat cell components and ECM) with Sculptra to lift immediately and stimulate collagen growth over weeks.
“And this material is partly partially fat cells, partially what we call ECM, which is basically the matrix of your own fat cells to help them grow.”
On a lean, muscular patient with minimal fat, Dr. Emer places the material in the subcutaneous layer and deeper to build the shelf and smooth the skin.
THE THINKING BEHIND THE TREATMENT
Follow Dr. Emer’s approach through the stages described in this case.
Back to the video ↗He lost a lot of weight and works out consistently. The muscle was there, but the lift was not.
He arrived lean and disciplined, with real muscle in the glutes. The buttock was strong, but the upper shelf and the lift stayed flatter than the work he was putting in. This was not his first session with Dr. Emer: each treatment builds on the last, layered on months of training.
“Our goal for him, he lost a lot of weight and he works out a lot. So our goal was to volumize to use this to lift and enhances working out.”DR. JASON EMER · FROM THE VIDEO
Planned around a training schedule: minutes per side, and back under the bar within days.
“We are injecting that upper portion so that we can get a lift. And you can see improvement in the wrinkling too as well as the volume.”DR. JASON EMER · FROM THE VIDEO
Dr. Emer placed Alloclae blended with Sculptra along the buttock and molded it directly into the muscle. The lift was visible side by side during the session, one side treated while the other waited, then both blended and symmetric. Each entry point closed with a single dissolvable stitch, and he was cleared to train again within days.
“And so we're using it in this way that we're going to basically mold it into his tissue.”DR. JASON EMER · FROM THE VIDEO
“So, you guys see even the side that we just did over here. Take a look how smooth that is as you massaged in.”DR. JASON EMER · FROM THE VIDEO
This patient can be back in the gym within a few days. That matters, because the result is designed to work with training: as he loads the glutes, the material molds and firms into the contour rather than fighting it.
This was not his first session. Dr. Emer has done treatments before, and this visit was about building the upper shelf and enhancing the lift where he wanted more.
“And this tissue will bind his skin. It'll bind to the fat and it'll build, especially with his working out. He works out a lot.”DR. JASON EMER · FROM THE VIDEO
Upper shelf and lift, built as one plan / Patient story
He lost a lot of weight and works out consistently. The muscle was there, but the lift was not.
He arrived lean and disciplined, with real muscle in the glutes. The buttock was strong, but the upper shelf and the lift stayed flatter than the work he was putting in. This was not his first session with Dr. Emer: each treatment builds on the last, layered on months of training.
Dr. Emer placed Alloclae blended with Sculptra along the buttock and molded it directly into the muscle. The lift was visible side by side during the session, one side treated while the other waited, then both blended and symmetric. Each entry point closed with a single dissolvable stitch, and he was cleared to train again within days.
The patient in this video is not starting from zero. He lost a lot of weight, he works out consistently, and he has real muscle. The buttock is where training alone stalled: the muscle was there, but the upper shelf and the lift stayed flatter than the work he was putting in.
That is the case Dr. Emer built this treatment for. Alloclae blended with Sculptra is placed to lift the bottom of the buttock and build the upper shelf, molding into the muscle he already has instead of sitting on top of it.
Alloclae is a regenerative filler that binds to the surrounding tissue, and Sculptra stimulates collagen over the following weeks. Placed together along the buttock, the blend adds immediate lift and then keeps building as the material integrates with skin and muscle.
In the video the change is visible side to side: one side treated and lifted while the other waits, then both sides blended and symmetric. Dr. Emer closes each entry point with a small dissolvable stitch, so there is nothing to remove later.
How a session is built
Planned around a training schedule: minutes per side, and back under the bar within days.
The buttock is assessed and marked so both sides finish symmetric and blended.
Alloclae with Sculptra is placed along the buttock and upper shelf, then molded into the muscle by hand.
Each entry point closes with a single dissolvable stitch, nothing to remove later.
Most patients are cleared within days, and continued training helps the result firm into the contour.
The treatment, explained
Also called buttock enhancement for men, Alloclae buttock lift, Sculptra butt lift, regenerative buttock enhancement, gluteal augmentation without implants, butt lift for athletes.
Ready when you are.
Pick your consultation, reserve it online with a card, and Dr. Emer's team confirms the time. Or call the office.
Signature procedures
Body / AETHRAFORM top tier
The top tier of MAXORIS™ body sculpting: high-definition liposculpture, fat grafting and internal tightening, planned as one masculine geometry rather than separate areas.
Peptides / biologic optimization
Peptide and biologic protocols for recovery, body composition and longevity, with epigenetic testing. RECODEX™ peptides are available to purchase through the practice after consultation.
Face / jaw
Dr. Emer's male jaw and face sculpting: a sharp mandibular line and defined angles, built with structural filler, debulking liposuction with internal heating, and hidden-scar neck lifting when the anatomy calls for it.
Why Dr. Emer
Two decades of results, a global patient base, and techniques other surgeons travel to learn.
Dr. Emer built his reputation on outcomes that read as natural at rest and unmistakable in motion. He pioneered high-definition body sculpting approaches that are now taught internationally, and he personally performs every procedure in his practice.
Patients come to him when the result has to be precise: athletes protecting a physique they earned, men who want structure without an implant, and people who have been elsewhere and want it done right.
Asked plainly, answered plainly
No. It is a regenerative filler blend placed into and over the muscle, with no implant and no surgical recovery. The material is molded by hand into the tissue during the session.
A visible lift appears during the session. The outcome continues building for weeks as collagen forms and the material integrates with the muscle. Continued training helps the result firm into the contour.
Most patients return to the gym within days. The material firms as training continues. Recovery and activity restrictions are set during consultation based on your plan.
Many patients build in stages. The patient in this video has had treatments before, and each session builds on the last, layered on months of training. Your plan is set during consultation.
Alloclae is an acellular dermal matrix that contains fat cell components and extracellular matrix (ECM). It helps the body grow its own tissue. Dr. Emer blends it with Sculptra to lift immediately and stimulate collagen growth over weeks.
Yes. Dr. Emer places the material in the subcutaneous layer and deeper to build the shelf and smooth the skin, even on lean, muscular patients with minimal fat. The technique is adapted to your build.
Yes. The material is molded into the muscle and tissue by hand, and it binds to the skin, fat and muscle as it integrates. Continued training helps the result firm into the contour.
The material stimulates collagen growth and integrates with the tissue. The result is long-lasting, and many patients return for additional sessions to continue building. Longevity is discussed during consultation.
Ask Dr. Emer in person.
Every question above is answered properly in a consultation. Book online, or call the office.
A consultation with Dr. Emer covers your build, your goals, and whether regenerative buttock enhancement fits your plan.
West Hollywood and New York City