Jason Emer, MD, FAAD, FACS
Rounder Glutes Without Surgery: Alloclae Plus Sculptra For Men Who Train
How Dr. Jason Emer builds and lifts the male glute using Alloclae blended with proprietary peptides and PLA, with minimal downtime and results that improve as you train.
Dr. Jason Emer MD · FAAD · FACS
The practice's own photographs
Patients of the practice, from Dr. Emer's published before and after gallery. Each case is one patient. Individual results vary.
Alloclae blended with proprietary peptides and PLA, molded by hand into trained muscle, adds roundness and lift with days of downtime, not weeks.
Your plan starts with Dr. Emer.
Schedule ConsultationReserve online. West Hollywood and New York.
From the filmed session
What Dr. Emer did · MAXORIS
Nerve block administered to make the session tolerable, followed by local lidocaine infiltration at injection sites.
“we have really good nerve blocks that make it much more tolerable”
Dr. Emer, in the film
Alloclae (cadaver ECM basement membrane) mixed with proprietary peptide combinations and PLA, injected deep into glute tissue in multiple passes, top to middle to bottom, creating immediate volume and tissue stimulation.
“we have our large volume volumizer alo clay that we mix with proprietary combinations of peptides and PLA to get a amazing result for our patients who don't want to do a surgery”
Dr. Emer, in the film
Material hand-molded into position immediately after placement to create roundness at the top, peak at the middle, and softness at the bottom, with blending massage to ensure even distribution.
Single dissolvable stitch at each entry point, self-absorbing within days.
“now all we do is we put in a dissolvable stitch and in a couple days those will fall out”
Dr. Emer, in the film
Why patients fly in
Alloclae is cadaver ECM (the basement membrane that holds fat cells in tissue) blended with peptides and PLA to stimulate the patient's own tissue, not simply add volume. The initial result builds over months as the patient trains.
Dr. Emer molds the material by hand immediately after injection, shaping roundness at the top, a peak at the middle, and softness at the bottom, adjusting in real time as he assesses symmetry.
Patients return to the gym within a couple of days, and continued training helps the result build. No surgical recovery, no weeks off training.
“in a couple days, he can go back to the gym”
Additional sessions can be performed immediately if more volume is desired. No mandatory waiting period between treatments because the material integrates as the patient's own tissue.
THE THINKING BEHIND THE TREATMENT
Follow Dr. Emer’s approach through the stages described in this case.
Back to the video ↗Consistent training built muscle, but the glutes stayed flat and the laxity from weight loss needed density.
He arrived having lost a bunch of weight and built good muscle, but the glutes had that laxity that comes with weight loss and needed density, not just shape. Dr. Emer placed Alloclae blended with proprietary peptides and PLA to add roundness and lift, molding the material into place by hand.
Planned around a training schedule: minutes per side, and back under the bar within days.
The lift was visible side by side during the session: one side treated while the other waited, then both blended and symmetric. Each entry point closed with a single dissolvable stitch that falls out on its own, and he was cleared to train again within a couple of days.
This patient can be back in the gym within a couple of days. That matters, because the result is designed to work with training: as he loads the glute, the material molds and the muscle underneath is stimulated. Dr. Emer recommends adding True Sculpt Flex or EMSculpt to further activate the area, or simply continuing to train.
The initial result is not the final result. It improves over the following months as the tissue integrates and the patient works out.
“And in a couple days, he can go back to the gym.”DR. JASON EMER · FROM THE VIDEO
Glutes that build as you train / Patient story
Consistent training built muscle, but the glutes stayed flat and the laxity from weight loss needed density.
He arrived having lost a bunch of weight and built good muscle, but the glutes had that laxity that comes with weight loss and needed density, not just shape. Dr. Emer placed Alloclae blended with proprietary peptides and PLA to add roundness and lift, molding the material into place by hand.
The lift was visible side by side during the session: one side treated while the other waited, then both blended and symmetric. Each entry point closed with a single dissolvable stitch that falls out on its own, and he was cleared to train again within a couple of days.
The patient in this video lost weight and built muscle, but the glutes stayed flat. He had the laxity that comes with weight loss and needed density, not just shape. That is the case Dr. Emer built this treatment for: Alloclae blended with proprietary peptides and PLA placed to add roundness and lift, then stimulated further by the patient's own training.
This is not a replacement for surgery when surgery is the right tool. It is an office procedure for men who want a rounder glute without the downtime of fat grafting or a full BBL, and who are willing to build the result over time with their workouts.
Alloclae is a regenerative volumizer made from cadaver ECM, the basement membrane that holds fat cells in tissue. Dr. Emer blends it with proprietary peptides and PLA to help the material integrate and stimulate the surrounding tissue. Placed into the glute, it adds immediate volume and then continues building as the patient trains.
In the video the change is visible side to side during the session: one side treated and lifted while the other waits, then both sides blended and symmetric. The little bumps visible immediately after are lidocaine and smooth out within hours. Each entry point closes with a dissolvable stitch that falls out on its own.
How a session is built
Planned around a training schedule: minutes per side, and back under the bar within days.
A nerve block makes the session much more tolerable. There are a few pinches, but the numbing kicks in quickly.
Alloclae blended with proprietary peptides and PLA is placed into the glute, then molded by hand to create roundness and lift.
Each entry point closes with a single dissolvable stitch that falls out on its own in a couple of days.
Most patients are cleared within a couple of days, and continued training helps the result build over the following months.
The treatment, explained
Also called Alloclae glute augmentation, regenerative glute volumization, PLA glute lift, non-surgical BBL alternative, injectable glute sculpting for men, cadaver ECM glute enhancement.
Signature procedures
Body / AETHRAFORM top tier
The top tier of MAXORIS™ body sculpting: high-definition liposculpture, fat grafting and internal tightening, planned as one masculine geometry rather than separate areas.
Peptides / biologic optimization
Peptide and biologic protocols for recovery, body composition and longevity, with epigenetic testing. RECODEX™ peptides are available to purchase through the practice after consultation.
Face / jaw
Dr. Emer's male jaw and face sculpting: a sharp mandibular line and defined angles, built with structural filler, debulking liposuction with internal heating, and hidden-scar neck lifting when the anatomy calls for it.
Why Dr. Emer
Two decades of results, a global patient base, and techniques other surgeons travel to learn.
Dr. Emer built his reputation on outcomes that read as natural at rest and unmistakable in motion. He pioneered high-definition body sculpting approaches that are now taught internationally, and he personally performs every procedure in his practice.
Patients come to him when the result has to be precise: athletes protecting a physique they earned, men who want structure without surgery, and people who have been elsewhere and want it done right.
The material adds roundness and lift during the session, visible side to side as each side is treated.
The initial result is not the final result. It improves over the following months as the patient trains and the material integrates.
Dr. Emer recommends adding True Sculpt Flex or EMSculpt to further activate the area, or simply continuing to train.
If more volume is needed, additional sessions can be done without waiting. Most patients build the result over time.
Asked plainly, answered plainly
No. A Brazilian butt lift (BBL) is fat grafting with liposuction and surgical recovery, often weeks off training. This is an office procedure using a regenerative volumizer (Alloclae blended with peptides and PLA), with minimal downtime and return to the gym within days.
A visible lift appears during the session. Dr. Emer treats one side first so you can see the difference immediately. The outcome continues to build over the following months as you train and the material integrates with your tissue.
Most patients return to the gym within a couple of days. The dissolvable stitches fall out on their own. Mild soreness and temporary bumps from lidocaine resolve quickly. The specific timeline is set at consultation based on how your session goes.
If you have very minimal fat on the glute and expect a huge outcome, you will need a lot of product or multiple sessions. Candidacy depends on realistic expectations for what an injectable approach can do. Dr. Emer assesses your build and goals at consultation.
Yes. If you want more volume, additional sessions can be done immediately, even the next day. There is no mandatory waiting period because the material integrates as your own tissue. Most patients build the result over time.
There are a few pinches at the start, but the nerve block and local anesthesia make the session much more tolerable. Most patients describe mild discomfort during injection, then numbness as the anesthetic takes effect.
Alloclae is a cadaver-derived extracellular matrix (ECM), specifically the basement membrane that holds fat cells in tissue. Dr. Emer blends it with proprietary peptides and PLA to create a regenerative volumizer that adds immediate volume and stimulates your own tissue over time.
Yes. Continued glute training helps the result build as the material integrates. Dr. Emer recommends adding TruSculpt Flex or EMSculpt to further activate the area, or simply continuing your regular workouts. The more you stimulate the glute, the better the long-term outcome.
A consultation with Dr. Emer covers your build, your goals, and whether regenerative glute enhancement fits your plan.
Schedule ConsultationWest Hollywood and New York City